Specifications:
Model Number :AT-41500
1KHz(EIA) with 0.5% THD
4Ω STEREO:2300W*4
8Ω STEREO:1400W*4
8Ω bridge mono:4600W*2
Performance:
Voltage Gain: 42.7/40.5/32
Total harmonic Distortion (THO) : ≤0.05%（＠ 8Q, 1kHz, 1/6 rated power
Inter-modulation Distortion [IMD) : ≤0.15%(@ 8 Q, 1KHz, 1/8 rated power
Power voltage : ~90~265V
Power Connector: Standard IEC connector
Output Grade (Technology Type): Class D
Frequency Response (at 1 Watt) : 1OHz-20KHz,+/-1 dB
Damping Factor : ≥600 [10Hz-400Hz, 8 ohm)
S/N Ratio (20Hz-20Khz,4 Ohms) : >106db
Crosstalk (1 KHz, 4ohm) :>40db
Input sensitivity : 0.775V,0dB
Input impedance(nominal) Power Delay : Balance 10K ohms, unbalanced 20K ohms
Slew Rate: 20v/ µ S
Connectors,Controls and Indicators
Input Connectors: XLR socket ( female)
Output connectors : SPEAKON
Front Panel Controls : Power on/off switch and Volume Control
Rear Panel Controls : Output mode switch for mono, stereo or bridge selection
LED Indicators: Three LED lights for every channel. Clip/-10dB,signal and Mono/bridge/Status lights in front panel.
Cooling system: Cooling fans with variable speed
Construction:
Protections: Protection against RF, on/off switching, short circuit, direct current, over load, low voltage &over-heat
Ventilation : Flow-through ventilation from front to back
Dimensions [WxHxD) : 483*44*381mm
Net Weight :10.2kg
Shipping Weight:11kg
Accessories: Operation manual 1pc. power cord plug 1pc
